No more hand cranking that solution hose. The
new high speed electric solution hose reel from BLUEline Equipment
Co. features a paint lock base and an aluminum reel with
250 foot ¼ inch hose
capacity. See the photo!
-
Europeanstone Consultancy Limited Signs
with BLUEline Equipment Co.
- November 12, 2007Europeanstone Consultancy, based in the United Kingdom,
recently entered into an exclusive agreement with BLUEline
Equipment Co. to provide ThermalWave® II HP Vortec models for
their franchises. Europeanstone, a one stop shop for all hard
surface maintenance problems and concerns, plans to franchise
throughout Europe. Andrew Walker and David Cox are company
directors. “After extensive research, we chose BLUEline
Equipment Co. because we wanted the best equipment and worldwide
distribution,” said Walker. Cox added, “We also wanted to ensure
that we are providing superior technical support and customer
service for our franchises.” BLUEline Equipment offers a line of
truckmounts, accessories and parts as well as service and
technical support. Visit the web site at
www.bluelineequip.com
and visit the Europeanstone site at
www.europeanstone.co.uk.
- NEW COBALT® Truckmount
from BLUEline Equipment Company
Tough,
durable and dependable, the BLUEline Equipment Company COBALT® truckmount
is the best choice for single wand operations. Ideal for residential
and light commercial jobs. Click here for more
information.
-
All BLUEline Equipment Company
Truckmounts feature a Minimal Back Pressure Heat Exchange
Design
With our patented heat transfer/Minimal
Back Pressure (MBP) heat exchange design, our truckmounts
outperform all other truckmounts in their class. Our truckmounts
offer superior performance while safeguarding the engine and other vital
components against premature failure caused by excessive back
pressure.
-
The ThermalWave® II Vortec
and HP with Non-Interference, Non-contact Engines
The difference between Interference or contact engines and
non-interference, non-contact engines lies in the
proximity between the valves and the pistons. On an interference
or contact engine, if the timing belt slips even one notch, the
piston can crash into an open valve causing serious engine
damage by bending valves and breaking pistons. Non-interference
or non-contact engines will not self destruct, rather they will
freewheel to a stop should the timing belt ever be compromised.
With the interference or contact engines, manufacturers are
recommending changing the timing belt every 2,000 hours. This
entails disassembly of the truckmount, accessing the timing belt
cover, removing the cover and changing the belt. It is
cumbersome and expensive. The ThermalWave II Vortec and HP have
non-interference engines. We recommend the timing belt be
changed every 12,000 hours. We are hearing that many end-users
are uneasy about purchasing a unit with a contact engine, so
this is the ideal opportunity to sell them on the ThermalWave II
Vortec, since this is not an issue. Not to mention the many
other benefits of our products including our patented Minimal
Back Pressure (MBP) heat exchange technologies.
- BLUEline Equipment Company Wins Award
- June
26, 2007
BLUEline Equipment Company was recently awarded the National
Vendor of the Year Award at SERVPRO Industries 38th Annual
Convention and Trade Show held in Palm Desert, California. Once
each year, vendors are voted on from over 12 different
departments within SERVPRO Industries Corporate Headquarters for
overall performance. Past SERVPRO awards for BLUEline Equipment
Company include Up and Coming Vendor of the Year and National
Vendor of the Year.
- Technical Manuals Now Available on Web
Site - May 24, 2007
The BLUEline Equipment Company Technical manuals are now
available on the web site. You do need a password to access the
manuals. Email
Kevin or
Scott
to get the password.
- The ThermalWave® II Vortec and ThermalWave® II HP Now Certified -
March 27, 2007
The GM Vortec 1.6 liter 4 cylinder engine has been certified by the EPA and by the California Air Resources Board (CARB) for use in ThermalWave® II truckmounts. This means the engine meets very specific and rigorous emissions criteria. BLUEline Equipment Company’s application has been approved by Power Solutions, Inc., a major provider of OEM power solutions. This means the ThermalWave II® Vortec and HP units can be sold in all 50 states.
Find out more about the ThermalWave® II Vortec and ThermalWave® II HP here...
- BLUEline Equipment Co.
Conquers Australia - March 27, 2007
BLUEline
Equipment Co. staff Thom Fielding and Rick Love traveled
to Australia in February.
The folks at Advanced Specialized Equipment made
everyone feel comfortable. After a couple of days of service and sales training, the
group traveled to Sydney, Rockhampton, the Sunshine
Coast, Brisbane and Port Macquarie to participate in
Customer Appreciation Days and to meet end users first
hand. Some pictures from the trip are below.
Click on the photos to view larger.
- BLUEline Cleans Up at the Cleaning Show in the UK
- March 27, 2007
ALLTEC, a BLUEline distributor in the UK, has had a fantastic amount of interest after demonstrating the new ThermalWave II® VORTEC truck mount at the NEC Cleaning Show 2007. Below is a link to an article detailing ALLTEC's use of the ThermalWave II® VORTEC as well as some photos from the show.
http://www.tnn.co.uk/IndustryNews/plonearticle.2007-03-22.4156299051##
Click on the photos to view larger.
- Vortex Artwork added to Graphics
Page
- Love Joins
BLUEline Equipment Co. as Director, Sales and Marketing
- January 5, 2007
 |
BLUEline Equipment Co., a premiere truckmount manufacturer and parts and service supplier, announces the addition of Rick Love as Director, Sales and Marketing.
His responsibilities include sales, distributor development, marketing, and new product development. “My goals are to increase market share for our existing distributor base and to expand the distributor base, which will offer more product support for end-users.”
Read the full release here... |
|
|
|
|
